Embedded Display Module 4.3 Inch
Display Module – 4.3 inch Capacitive TP
Intelligent display module
Resolution: 480×272 pixels
Capacitive touch panel
Size 122 x 99 mm


Product LCD Display 2.2” TFT

General Information
ITEM | STANDARD VALUES | UNITS |
LCD type | 2.2’’TFT | — |
Dot arrangement | 240(RGB)×320 | dots |
Color filter array | RGB vertical stripe | — |
Display mode | TN / Transmission / Normally White | — |
Viewing Direction | 6 o’clock | — |
Module size | 40.1(W)×55.2(H)×2.4(T) | mm |
TFT Active area | 33.84(W)×45.12(H) | mm |
Dot pitch | 0.141 (W)×0.141 (H) | mm |
Interface | 4-lines_8bit SPI | — |
Back Light | 4 White LED In Parallel | — |
Interface Description
Pin | Symbol | Description. |
1 | GND | Power ground |
2 | RESET | Reset input pin, Active “L”. |
3 | SCL | This pin is used serial interface clock in SPI. |
4 | D/CX | Serves as command or parameter select. |
5 | CSX | Chip select input pin (“Low” enable) in SPI I/F. |
6 | SDI | Serial input signal in SPI I/F. |
7 | SDO | Serial output signal in SPI I/F. |
8 | GND | Power ground |
9 | VCC | System power supply. |
10 | LEDA | LED backlight (Anode). |
11 | LEDK1 | LED backlight (Cathode). |
12 | LEDK2 | LED backlight (Cathode). |
13 | LEDK3 | LED backlight (Cathode). |
14 | LEDK4 | LED backlight (Cathode). |
Networking Processor QorIQ T4240
The T4240, with 24 virtual cores, is the flagship of the QorIQ® T series. With the T4160 (16 virtual cores) and T4080 (8 virtual cores), the T4 family has a 3x performance scaling factor within a pin-compatible package. Low-power variants are also available: T4241 (24 threads), T4161 (16 threads), and T4081 (8 threads).

With frequencies scaling to 1.8 GHz, integrated 1Gbps and 10Gpbs Ethernet, hardware acceleration and advanced system peripherals, these products target applications that benefit from consolidation of control and data plane processing in a single SoC, such as services cards, microservers, ADCs, WOCs, intelligent NICS, RNCs.
Twelve dual-threaded e6500 cores built on Power Architecture® technology on T4240/T4241, each with one AltiVec® engine (eight and T4160/T4161 and four on T4080/T4081) Arranged as three clusters of four e6500s, each sharing a 2 MB L2 cache (two clusters on T4160/T4161 and one cluster on T4080/T4081). Up to 1.8 GHz with 64-bit ISA support (Power Architecture v2.06-compliant) Three levels of instruction: user, supervisor, and hypervisor 1.5 MB CoreNet® Platform Cache (1MB on T4160/T4161 and T4080/T4081)

Battery BL-5C
Rechargeable Li-ion Battery
3.8V 1450mAh


Glass Sapphire

Raspberry Pi 4
The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications. Raspberry Pi Compute Module 4 incorporates a quad-core ARM Cortex-A72 processor, dual video output, and a wide selection of other interfaces. Available in 32 variants, with a range of RAM and eMMC Flash options, and with or without wireless connectivity.

Specifications
- Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
- 2 × micro-HDMI ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.0 graphics
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate PoE HAT)
- Operating temperature: 0 – 50 degrees C ambient